Slingshop.com New By Manufacturer Products

White with clear lens Black Baffle/Eyeball Trim

White with clear lens Black Baffle/Eyeball Trim. Adjustable 0° to 35°.

White Wiring Connector

Polycarbonate tap off connector. Use to tap off of low voltage Ambiance® cable and create a parallel run for shelving, ect. Corrosion resistant contacts pierce the specially designed Ambiance® cable for electrical connection. UL and C-UL listed 12v and 24v. Wet location 12v only. Maximum wattage after connector on 105°C Ambiance® tap cable: 200 at 12v; 375w at 24v.

White Trumpet Glass Shade

Ambiance White Trumpet Glass Shade

White Straight Connector

Low profile connector.

White Step Cylinder with Baffle

Flexible and easy to install for the most effective use of "directional" lighting in any environment.
20 amp max. per run.

Wattage: One (M) 75w Max. (PAR30)

White Slot Aperture Trim

White Slot Aperture Trim. Adjustable 0° to 45°.

White Round Cylinder with Baffle

Flexible and easy to install for the most effective use of "directional" lighting in any environment.
20 amp max. per run.

Wattage: One (M) 75w Max. (PAR30)

White PAR20 Gimbal Ring

Flexible and easy to install for the most effective use of "directional" lighting in any environment.
20 amp max. per run.

Wattage: One 50w Max. (PAR20)

White Optional Trim Ring

Optional Decorative Metal Trim Ring.
Used in conjunction with trims on page 37 and fixtures on page 34 - 34.

White Open Trim with Lens

UV stabilized silicone rubber gasket holds a tempered borosilicate glass lens and polished lens and polished aluminum reflector.

White Mono-Point Canopy

For individual lampholder installation.

White Miniature Recessed Light

UV stablized silicone transformer. UV stablized silicone rubber flood trim with glass lens. Trim rotates 360°, center beam fixed at 30° from center. MR 11 lamps maximize light output and offer height intensity, crisp, white light. Choose lamps with various beams to suit any application.
Wattage: One MR11 20w max.

White Low Voltage Miniature Switch

Momentary push, on/off slide switch. Perfect for use inside of cabinets, etc. Door open (lights on), door closed (lights off) or use as an on/off switch. Polycarbonate swich (with screws provided) attaches to any surface. Complete wiht 13" 18/2 cord and fused plug to snap onto Ambiance® cable and track for electrical connection. Enclose cord in track and cover if desired. UL and C-UL listed 12v and 24v. Wet location 12v only. Includes wire clip for outdoor use. Maximum wattage on switched line 50w at 12v; 90w at 24v.

White Live End Power Feed

Powerfeed with canopy plate.

White Live End Conduit Power Feed

White Left or Right Cover

Polycarbonate 90° right or left cover snaps onto 9435 track and 9439 cover to create a finished look and concealed raceway.
>UL and C-UL listed.

White Glass Pyramid with Etched Glass Step Design

White Glass Dome with Etched Glass Step Design

White Fused Plug

Polycarbonate fused plug with corrosion resistant contacts. Snaps onto Ambiance® cable and 9435 track or 9443 track/fascia for electrical connection to fixture. Insert 18/2 SPT-1 or equal size cord into plug and press in contacts. Enclose cord in track and cover if desired to create a concealed raceway. For use when installing fixtures with 18/2 AWG cord on Class I system. Maximum wattage after fuse, 60w at 12v or 100w at 24v. UL and C-UL listed.

White Flood Trim

UV stablized silicone rubber gasket holds a tempered borosilicate glass lens and polished alumnum reflector. Trim rotates at 360° from center. Beam angle is fixed at 30° from vertical.

White Floating Power Feed

Powerfeed anywhere on the track.

White Flat Cylinder with Baffle

Flexible and easy to install for the most effective use of "directional" lighting in any environment.
20 amp max. per run.

Wattage: One (M) 50w Max. (PAR20) or 75w Max. (R20).

White Fascia End Cover

Polycarbonate fascia end cover snaps onto either end of 9443 track/fascia panell to create a finished look and to hide the lighting system when viewed from either end.
UL and C-UL listed.

White Die Cast Eyeball Adj. Trim

White Die Cast Eyeball Adj. Trim. Adjustable 0° to 80°.

White Baffle Trim

White Baffle Trim. Adjustable 0° to 15°.
One (MR16), 50w Max.

White Alabaster Dome Shade

Ambiance White Alabaster Dome Shade

White 500 Feet Cable

Specially designed, easy piercing, self-sealing insulation over sranded copper wire for use with the Ambiance® LX Lighting System. Markings for socket placement every 2".
For use with track. UL and C-UL listed.

105°C 10/2 cable for indoor use only. Maximum wattage per length 300w at 12v; 500w at 24v.

White 50 Feet Cable

White 25 Feet Cable

White 12v Open Gimbal Ring

Flexible and easy to install for the most effective use of "directional" lighting in any environment.
20 amp max. per run.

Wattage: One 12v (Bi-Pin) 50w Max. (MR16)

White 1000 Feet Cable

White 100 Feet Cable

White "T" Connector

Use for "T" runs.

White "L" Connector

Use for 90° turns.

UV Filter Lens

Ultra Violet Glass Filter
Museum quality Ultra Violet filter. Filters out UV transmission below 400 NM.

Two Light White Plug-In Ambiance Disk Kit

Kit includes plug-in disk lights, 18w lamps and plug-in transformer with outlet for easy connection.
Low profile polycarbonate disk lights can be surface mounted or recessed into as little as 3/4" thick material without boring through.
Surface mount ring and mounting crews included or a 2 3/4" diameter hole may be drilled for recessed mounting.
Glass shield not required for UL listing.
Optional trims available for a variet of lighting effects.
Satin aluminum reflector maximizes light output.
72" cord and plug.

Two Light Polished Brass Plug-In Ambiance Disk Kit

Two Light Eurotech Plug-In Ambiance Disk Kit

Two Light Black Plug-In Ambiance Disk Kit

Transitions Trenton Three Light Rail Kit

Three transitional directional lampholders with twisted wire details and ember glow glass. Four-foot extruded aluminum rail with 12 gauge conductors and two dead ends. Rail is field bendable by hand or use template (minimum radius 12"). Power feed standoff with canopy and mounting hardware. Lampholders swivel, rotate, and aim in any direction and attach at any point along rail.

Transitions Trenton Directional Lampholder

Transitions Rail Support Adapter

For use on end of rail if outlet box is located in center of rail, or for use where rail support adapter is required.

Transitions Optional Directional Lampholder

Three-Light Transitions Directional Rail Kit

Three Light White Plug-in Disk Kit

Kit includes plug-in disk lights, 18w lamps and plug-in transformer with outlet for easy connection.
Low profile polycarbonate disk lights can be surface mounted or recessed into as little as 3/4" thick material without boring through.
Surface mount ring and mounting screws included or a 2 3/4" diameter hole may be drilled for recessed mounting.
Glass shield not required for UL listing.
Optional trims available for a variety of lighting effects.
Well suited for commercial and residential applications.
Satin aluminum reflector maximizes light output.
72" cord and plug.

Three Light Polished Brass Plug-in Disk Kit

Kit includes plug-in disk lights, 18w lamps and plug-in transformer with outlet for easy connection.
Low profile polycarbonate disk lights can be surface mounted or recessed into as little as 3/4" thick material without boring through.
Surface mount ring and mounting screws included or a 2 3/4" diameter hole may be drilled for recessed mounting.
Glass shield not required for UL listing.
Optional trims available for a variety of lighting effects.
Well suited for commercial and residential applications.
Satin aluminum reflector maximizes light output.
72" cord and plug.

Three Light Eurotech Plug In Disk Kit

Kit includes plug-in disk lights, 18w lamps and plug-in transformer with outlet for easy connection.
Low profile polycarbonate disk lights can be surface mounted or recessed into as little as 3/4" thick material without boring through.
Surface mount ring and mounting screws included or a 2 3/4" diameter hole may be drilled for recessed mounting.
Glass shield not required for UL listing.
Optional trims available for a variety of lighting effects.
Well suited for commercial and residential applications.
Satin aluminum reflector maximizes light output.
72" cord and plug.

Three Light Black Plug In Disk Kit

Kit includes plug-in disk lights, 18w lamps and plug-in transformer with outlet for easy connection.
Low profile polycarbonate disk lights can be surface mounted or recessed into as little as 3/4" thick material without boring through.
Surface mount ring and mounting screws included or a 2 3/4" diameter hole may be drilled for recessed mounting.
Glass shield not required for UL listing.
Optional trims available for a variety of lighting effects.
Well suited for commercial and residential applications.
Satin aluminum reflector maximizes light output.
72" cord and plug.

Stake

Black Stabilizer Stake

Spread Lens

Clear tempered glass spread lens with optic ribs provides ellipical diffused distribution and minimizes striations.

Single-Light Outdoor Path Fixture

Ambiance Landscape Lighting System. 120v Incandescent die cast landscape light.

Single-Light Outdoor Path

Ambiance Landscape Lighting System. 120v Incandescent die cast landscape light.

Screw

3/8" long #4 Phillips falt head screws for attaching 9874 or 9435 track or 9443 track/fascia panel to surface. Each box contains 50 screws.

RX Miniature-Joiner

Use for joining two 94136 or 94137 rails.
Conductive and non-conductive applications.

RX High-Tech European Directional Luminaire

Select luminaire then select optional glass or metal shades.
Provide functional accent lighting with 50w MRC16 or use as a soft general light source with 50w GY6.35 and etched lamp enclosure (included).
Simply side adapter over rail and thread cap to install.
Luminaire head swivel, rotates and aims in any direction.
Luminaires attach at any point along the rail.
Use MR16 lamp and select the optional MR16 lamp accessory ring with glass lenses or honeycomb louver for desired lighting effects.
For use on single circuit rigid, two circuit flexible rail and single circuit rail assemblies.

Wattage One 50w max. (GY6.35 or MRC16, GU53)
Voltage: 12/24v

RX Eurotech Wall Power Feed Canopy

Electrically feeds from end of the rail.
Use for electrical feed and/or mechanical support of rail.
Complete with 4 7/8" and 3 3/16" diameter canopies and mounting hardware.
Mounts to a standard 4" or 2" junction box (94205) (not included).
300w max. at 12v or 500w max. at 24v.
Can feed two independent circuits.

RX Eurotech Standoff Joiner

For flexible 94131, 94132 and rigid 94136, 94137 rails.
Conductive and non-conductive.
Electrically feeds and connects two sections of rail (or) remove contacts for mechanical, non-conductive joiner.
300w max. at 12v or 500w max. at 24v.

RX Eurotech Soft Roundback Mono-Point Luminaire

Select luminaire then select optional glass or metal shades.
Provide functional accent lighting with 50w MRC16 or use as a soft general light source with 50w GY6.35 and etched lamp enclosure (included).
Swivel, rotate and aim in any direction.
Use MR16 lamp and select the optional MR16 lamp accessory ring with glass lenses or honeycomb louver for desired lighting effects.

Wattage: 50 max. (MRC16, GU5.3 or GY6.35)
Voltage: 12/24v

RX Eurotech Soft Roundback Directional Luminaire

Select luminaire then select optional glass or metal shades.
Provide functional accent lighting with 50w MRC16 or use as a soft general light source with 50w GY6.35 and etched lamp enclosure (included).
Simply slide adapter over rail and thread on cap to install.
Swivel, rotate and aim in any direction. Luminaires attach at any point along the rail.
Use MR16 lamp and select the optional MR16 lamp accessory ring with glass lenses or honeycomb louver for desired lighting effects.
For use on single rigid, two circuit flexible rail and single circuit rail assemblies.

Wattage: One 50w max. (GY6.35 or MRC16, GU5.3)
Voltage: 12/24v

RX Eurotech Rail Wall Support

Mechanically supports rail from wall.
Use with 6" and/or 12" interconnecting stem extensions if desired.
Max. distance from wall is 30".
Field adjustable air craft cable support.
Complete with all mounting hardware.
Non-electrified adapter.
Use with either 94145, 94150 or 94151 power feeds when wall mounting is desired.

RX Eurotech Rail Wall Power Feed / Support

Electrically feeds and supports rail from wall.
Single circuit 30" long 10AWG supply wires.
Use with 6" and/or 12" interconnecting stem extensions if desired.
Max. distance from wall is 30".
Field adjustable air craft cable support.
Complete with both 4 7/8" and 3 3/16" diameter canopies and mounting hardware.
Mounts to standard 4" or 2" junction box (94205) (not included).
300w max. at 12v or 500w at 24v.

RX Eurotech Rail Flexible Joiner

Use to electrically join two sections of rail where a tight radius or an offset is required.
Flexible silicone bellows, encases 10 AWG wires.

RX Eurotech Mechanical Rail Joiner / Isolator

Mechanically joins two sections of rail.
Non-conductive

RX Eurotech High-Tech Mono-Point Luminaire

Select luminaire then select optional glass or metal shades.
Provide functional accent lighting with 50w MRC16 or use as a soft general light source with 50w GY6.35 and etched lamp enclosure (included).
Swivel, rotate and aim in any direction.
Use MR16 lamp and select the optional MR16 lamp accessory ring with glass lenses or honeycomb louver for desired lighting effects.

Wattage: 50 max. (MRC16, GU5.3 or GY6.35)
Voltage: 12/24v

RX Eurotech High-Tech Directional Luminaire

RX Eurotech Electrical Rail Joiner

Electrically feeds and connects two sections of rail. 300w max. at 12v or 500w max. at 24v.

RX Eurotech Directional Luminaire

Select luminaire then select optional glass shades.
Provide functional spot lighting with 50w MRC16 or use as a soft general light source with 50w GY6.35 and etched lamp enclosure (included).
Simply slide adapter over rail and thread on cap to install.
Swivel, rotate and aim in any direction.
Luminaires attach at any point along the rail.
Use MR16 lamp and select the optional MR16 lamp accessory ring with glass lenses or honeycomb louver for desired lighting effects.
For use on single circuit rigid, two circuit flexible rail and single circuit rail assemblies.

Wattage: One 50w max. (GY6.35 or MRC16, GU5.3)Voltage: 12/24v

RX Eurotech Cable Support Adapter

10' field adjustable aircraft cable.
Use where non-visible floating rail support look is desired.
Complete with mounting hardware.
Non-electrified adapter.

RX Eurotech 8' Rigid Rail: Single Circuit

Single circuit rail. Accommodates up to 300w at 12v or 500 at 24v per circuit.
Field bendable with 94130 bender or consult factory for custom bends.
Complete with two dead ends.
Two aluminum rigid conductors separated by a thermoplastic insulator.
Select optional miniature joiner for longer runs.

RX Eurotech 8' Flex Rail: Two Circuit

Two circuit rail. Each circuit accommodates up to 300w at 12v or 500w at 24v.
Field bendable by hand or with 94130 bender. Consult factory for custom bends.
Complete with two dead ends.
Four aluminum rigid conductors separated by a thermoplastic insulator.
Select optional joiner for longer runs.

RX Eurotech 4' Rigid Rail: Single Circuit

RX Eurotech 4' Flex Rail: Two Circuit

RX Black Rail Field Bending Kit

For field bending 94131, 94132, 94136 and 94137 flexible and rigid rails.
Adjust rollers to bend rail to desired radius.
Use multiple "pass through" to achieve smooth bend.

RX Black Aluminum Honeycomb Louver

Provides 45° Glare Cut-off

Remodel / Non-IC Housing Recessed Lighting

UL listed for use where insulation is kept at least three inches away from housing.
UL listed for damp locations.
Thermal protector safeguards against overheating caused by improper insulating and overlamping.
Housing removable for easy access to junction box.
Junction box saves installation time with snap on covers, pry-out knock outs, riveted ground wire, through branch circuit wiring, two in-two out #12 wires.
Includes mounting clips and adjustable transformer support bracket for fast, easy installation.
Includes integral magnetic transformer offering years of trouble-free operation.
Accommodates up to 50w 12v MR16 lamp.

Red Glass Pyramid with Etched Glass Step Design

Red Glass Dome with Etched Glass Step Design

Recessed Mount Deck Light

Chestnut Recessed Mount Deck Light w/White Glass Lens

Polished Brass Optional Trim Ring

Optional Decorative Metal Trim Ring.
Used in conjunction with trims on page 37 and fixtures on page 34 - 34.

Polished Aluminum White Multiplier Trim

Polished Aluminum White Multiplier Trim. Adjustable 0° to 15°.
One (MR16), 50w Max.

Photocell

Photocell With Cord For Use With Ambiance Landscape Lighting Systens. Provides Duck-To-Dawn Operation.

Perforated MR16 Shield

Must be used with 94300 accessory ring. (Not Included). Adds shield from the back of MR16 lamp. Adds decorative element to MR16-type luminaires.

One Light Outdoor Path Fixture

Chestnut Tulip Path Light

New Construction/ IC Housing / Recessed Light

UL listed for use in direct contact with approved insulation allowing for significant energy savings.
UL listed for damp locations.
Meets airtight requirements for 2.0 CRM or less air leakage.
Thermal protector safeguards against overheating caused by overlamping.
Housing removable for easy access to junction box.
Junction box saves installation time with snap on covers, pry-out knock outs, riveted ground wire, through branch circuit wiring, four out #12 wires. Bar hangers are adjustable to 25 1/4" mounted on edge for sturdy installation.
Includes integral magnetic transformer offering years of trouble-free operation.
Accommodates up to 50w 12v MR16 lamp.

New Construction / Non-IC Recessed Lighting

UL listed for use where insulation is kept at least three inches away from housing.
UL listed for damp locations.
Thermal protector safeguards against overheating caused by improper insulating and overlamping.
Provided with captive nails for fast, easy installation.
Housing removable for easy access to junction box.
Junction box saves installation time with snap on covers, pry-out knock outs, riveted ground wire, through branch circuit wiring, four in-four out #12 wires.
Bar hangers are adjustable to 25 1/4"mounted on edge for sturdy installation.
Includes integral magnetic transformer offering years of trouble-free operation.
Accommodates up to 50w 12v MR16 lamp.

Mushroom Path Light

Black composite landscape path light, with diffuser, black polycarbonate stake, 18W T5 Xenon Wedge Base Lamp, easy connector, and three feet of 16/2 AWG cable for easy placement.

LX Wiring Compartment White

Steel wiring compartment with hole for 1/2" conduit connector, snap on cover and opening for track and cable. Includes terminal block for connection between transformer extension wire (i.e. Bx or Romex) and low voltage cable. Maximum wattage allowed for 10/2 AWG: 300w at 12v; 500w at 24v Max. UL and C-UL listed.

LX Wiring Compartment Black

LX Task Disk Light White

Satin aluminum reflector offers diffused illumination. For use with 9875 plug transformer.
Low profile polycarbonate disk lights can be surface mounted or recessed into as little as 3/4" thick material without boring through.
Complete with 72" cord and plug.
Surface mount ring and mounting screws included or a 2 3/4" diameter hole may be drilled in shelf fo recessed mounting.
Glass shield not required for UL listing.
Optional trims available for a variety of lighting effects.
UL and C-UL listed and 12v and 24v. Wet locations 12v only.
For use with Class II transformer or select 9488 fused plug for Class I transformer.
Well suited for commercial and residential applications

LX Task Disk Light Polished Brass

LX Task Disk Light Eurotech Finish

LX Task Disk Light Chrome

LX Task Disk Light Black

LX Support Rod / End Cap White

Use two steel support rod / end caps to support 1046-15 showcase light extrusion and enclose wiring from base of display case. Use one support rod / end cap with 1030 support clip to enclose wiring. Support rods may be easily cut to desired length.

LX Support Clip Steel

Steel clip to hold 1046-15 showcase light extrusion to glass display case. Extrusion simply snaps onto clip to support fixtures from glass edge. Breakaway on clip may be removed for attachment to flat solid surfaces.

LX Stabilizer Clip White

Noryl® stabilizer clip designed to be used only with 9864 and 9865 when going around turns or curves. Nail, staple, or use a 9862 screw through the pre-drilled hole attach clip with double faced tape.

LX Showcase Lighting System White

Exposed lamps.
46" extruded aluminum track/fascia with powdercoat finish.
124" of specially designed by Ambiance® cable.
72" of sleeving to cover cable between extrusion and transformer.
Five lampholders with anodized aluminum reflectors for maximum light output and even illumination.
Five 12v 18w Xenon lamps.
Choose open or polycarbonate lensed versions.
150w magnetic 12v transformer included.
System may be dimmed.

LX Miniature Wiring Compartment/Splicer White

Polycarbonate splicer with cover for connection between transformer extension wire (i.e. Romex) and low voltage cable, or use as a splicer between two sections of low voltage cable. (maximum wattage allowed for 10/2 AWG: 300w at 12v; 500w at 24v max). UL and C-UL listed.

LX Miniature Compartment/Splicer Black

LX Linear Lampholder White

Breakaway anodized aluminum reflector with white finish.
Heat resistent polycarbonate.
Ceramic socket.