Polycarbonate tap off connector. Use to tap off of low voltage Ambiance&reg cable and create a parallel run for shelving, ect. Corrosion resistant contacts pierce the specially designed Ambiance&reg cable for electrical connection. UL and C-UL listed 12v and 24v. Wet location 12v only. Maximum wattage after connector on 105°C Ambiance&reg ta...

20W Open Lens Halogen MR11

Clear tempered glass spread lens with optic ribs provides ellipical diffused distribution and minimizes striations.

20W Open Lens Halogen MR11

Black Powdercoat Aluminum Address Light Fixture

Ambiance Amber Onyx Dome Shade

Faceted polished aluminum reflector maximizes light output.Low profile polycarbonate disk lights can be surface mounted or recessed into as little as 3/4" thick material without boring through.Complete with 36" 18/2 cord. Surface mount ring and mounting screws included or a 2 3/4" diameter hole may be drilled in shelf fo recessed mou...

Faceted polished aluminum reflector maximizes light output.Low profile polycarbonate disk lights can be surface mounted or recessed into as little as 3/4" thick material without boring through.Complete with 36" 18/2 cord. Surface mount ring and mounting screws included or a 2 3/4" diameter hole may be drilled in shelf fo recessed mou...

Black aluminum Ambiance&reg surface mounted deck light.

Polycarbonate 90&deg right or left cover snaps onto 9435 track and 9439 cover to create a finished look and concealed raceway.UL and C-UL listed.

Polycarbonate twist-on eyelid trim shields glare while providing maximum light output.

Exposed lamps.46" extruded aluminum track/fascia with powdercoat finish.124" of specially designed by Ambiance&reg cable.72" of sleeving to cover cable between extrusion and transformer.Five lampholders with anodized aluminum reflectors for maximum light output and even illumination.Five 12v 18w Xenon lamps.Choose open or...

Noryl&reg stabilizer clip designed to be used only with 9864 and 9865 when going around turns or curves. Nail, staple, or use a 9862 screw through the pre-drilled hole attach clip with double faced tape.

Steel clip to hold 1046-15 showcase light extrusion to glass display case. Extrusion simply snaps onto clip to support fixtures from glass edge. Breakaway on clip may be removed for attachment to flat solid surfaces.

Specially designed, easy piercing, self-sealing insulation over sranded copper wire for use with the Ambiance&reg LX Lighting System. Markings for socket placement every 2". For use with track. UL and C-UL listed.105°C 10/2 cable for indoor use only. Maximum wattage per length 300w at 12v; 500w at 24v.

Amber Glass Dome with Etched Glass Step Design

Faceted polished aluminum reflector maximizes light output.Low profile polycarbonate disk lights can be surface mounted or recessed into as little as 3/4" thick material without boring through.Complete with 36" 18/2 cord. Surface mount ring and mounting screws included or a 2 3/4" diameter hole may be drilled in shelf fo recessed mou...

Optional Decorative Metal Trim Ring.Used in conjunction with trims on page 37 and fixtures on page 34 - 34.

3/8" long #4 Phillips falt head screws for attaching 9874 or 9435 track or 9443 track/fascia panel to surface. Each box contains 50 screws.

Satin aluminum reflector offers diffused illumination. For use with 9875 plug transformer.Low profile polycarbonate disk lights can be surface mounted or recessed into as little as 3/4" thick material without boring through.Complete with 72" cord and plug.Surface mount ring and mounting screws included or a 2 3/4" diameter hole may b...